Processor
Type: Sun UltraSPARC II 450 MHz
64-bit Computing: Yes
Installed Qty: 1
Max Supported Qty: 2
Upgradability: Upgradable
Cache memory
Type: L2 cache
Installed Size: 4 MB
Ram
Installed Size: 0 MB / 2 GB (max)
Technology: ECC
Storage controller
Type: 1 x SCSI - integrated - PCI
Controller Interface Type: Ultra Wide SCSI
Storage
Hard Drive: 1 x 36 GB - standard - Ultra Wide SCSI
Hard Drive (2nd): None.
Monitor
Monitor Type: None.
Graphics controller
Type: PCI - plug-in card
Graphics Card Name: Sun Creator3D
Supported Display Graphics: VGA (640x480), XGA (1024x768), SVGA (800x600), SXGA (1280x1024), UXGA (1600x1200)
Video Output Supported: RGB - NTSC, PAL
Audio output
Type: Sound card - PCI - plug-in card
Sound Output Mode: Stereo
Max Sample Rate: 48 kHz
Speaker(s): 1 x mixed channel
Input device
Type: Mouse, keyboard
Networking
Networking: Network adapter - PCI - integrated
Data Link Protocol: Ethernet, Fast Ethernet
Compliant Standards: IEEE 802.3, IEEE 802.3u
|
Manufacturer's product description
Ultra 60 is Sun's lowest cost multi-processor desktop workstation is ideally suited for modeling and virtual prototyping, animation, rendering, and video effects, geosciences, imaging and visualization, research and development, design and analysis. Ultra 60 workstation's balanced architecture means you can deploy all the processing power, memory, I/O, and graphics you need, with excellent overall performance. Ultra 60 has high memory bandwidth, allowing you to go up to two gigabytes of memory, support two processors and dual graphics UPA-based subsystems, run multiple disk arrays from its dual UltraSCSI buses, and run high speed peripherals on the fastest PCI bus around. Ultra 60 is 100% binary compatible with all Solaris applications, meaning you can run the same applications up or down the Sun product line. And with SunPCi, technical UNIX workstation users can run their MS Windows NT/9X applications on the same system. Ultra 60 allows you to run multiple high-performance graphics subsystems with Creator3D, and Elite3D simultaneously at full speed. This system is ideal for demanding technical users. Sun offers this chassis upgrade from UltraSPARC A11, A12, A14, A16 to Sun Ultra 60, 1x450MHz, Creator3D Series 3, no memory, 36GB hard disk drive. Customer returns a system chassis including CPU board, frame buffer and internal disk.
|
Expansion / connectivity
Expansion Bays Total (Free):
- 2 ( 2 ) x front accessible - 3.5" x 1/3H
- 1 ( 1 ) x front accessible - 5.25" x 1/2H
- 2 ( 1 ) x internal - 3.5" x 1/3H
Expansion Slots Total (Free):
- 3 ( 2 ) x PCI - full-length
- 2 ( 1 ) x processor
- 2 ( 1 ) x UPA
- 16 ( 16 ) x memory
- 1 ( 1 ) x PCI 64 - full-length
Interfaces:
- 1 x display / video - VGA - 15 pin HD D-Sub (HD-15)
- 1 x keyboard / mouse - generic - 8 pin mini-DIN
- 1 x parallel - IEEE 1284 (EPP/ECP) - 25 pin D-Sub (DB-25)
- 1 x storage - Ultra Wide SCSI - 68 pin HD D-Sub (HD-68)
- 2 x serial - RS-232/423 - 25 pin D-Sub (DB-25)
- 1 x audio - line-out - mini-phone stereo 3.5 mm
- 1 x audio - line-in - mini-phone stereo 3.5 mm
- 1 x headphones - output - mini-phone stereo 3.5 mm
- 1 x microphone - input - mini-phone mono 3.5 mm
- 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45
Power
Device Type: Power supply
Voltage Required: AC 100/240 V ( 47/63 Hz )
Compliant Standards: EPA Energy Star
Operating system / software
OS Certified: SunSoft Solaris 2.6, SunSoft Solaris 7, SunSoft Solaris 2.5.1, SunSoft Solaris 8
Software: Drivers & Utilities
Environmental parameters
Min Operating Temperature: 41 °F
Max Operating Temperature: 104 °F
Humidity Range Operating: 20 - 80%
Sound Emission: 61 dB
Ciao
Listed on Ciao since : 10/30/2007
|
Add to list 
Recommend it 
Receive review alert 
Write a review 
Publish video review 
This product has not yet been reviewed. 
