Intel - Fan unit

Advantages reliable, very upgradable, fast and very over-clockable.
Disadvantages no HT support, only USB 1.1, did anybody get built in LAN?

...BIOS and offers RAID support. No problems with installation - I used boxed Intel CPU's and the heatsink/fan units were easy to clip down. Just a matter of pushing two levers! I did scrape off the Intel thermal compound and added a thin layer of artic silver all over the top of the CPU. The Rambus rimms slotted in just like good old Dimms. They have built in heatsinks as they get quite hot. I used 4x 128mb rimms to keep costs down. This gave me 512mb of RAM. If you only use 2 rimms, you will need to use the C-Rimms (continuity rimms) to terminate the other 2 empty slots. These are included with the board. The Rambus memory is fast - equivalent to PC3200! You need to use matched pairs though and 128mb are the best value. 256mb isn't too bad but 512mb is very expensive. I disabled the built in sound immediately, and used a Creative Sound... Read review

Advantages Easy installation, small, sturdy, quiet, auto uplink
Disadvantages Runs quite hot

...cables. Operation Compatibility: Most recent PC's have at least a single gigabit Ethernet port on them now. Now you can make use of it. Tested fine with Intel Pro/1000 MT cards and nVidia nForce cards Noise It contains no fans so operation is completely silent, however, as with all other Netgear switches, this unit gets quite hot. For peace of mind it would be best to keep it away from sources of heat (I tend to lay an old PII heatsink on the unit just to help with the cooling!) Troubleshooting The LED indicators provide you with all the information you could possibly need to help diagnose any connectivity problems - not that you should have any Conclusion Very fast, reliable equipment. With prices for gigabit equipment coming down, now is a great time to upgrade... Read review