Processor
Type: 1 x MIPS RM5271 262 MHz RISC, 1 x MIPS R7000 350 MHz RISC, 1 x MIPS RM7000A 350 MHz RISC, 1 x RM7000 266 MHz RISC, 1 x MIPS RM7000 262 MHz RISC, MIPS RM7000 263 MHz RISC, 1 x MIPS RM7000A 350 MHz, 1 x MIPS R5000 200 MHz RISC, 1 x MIPS RM7000 350 MHz RISC
Max Supported Qty: 1
Networking
Connectivity Technology: Wired
Data Transfer Rate: 100 Mbps, 145 Mbps, 1 Gbps
Data Link Protocol: Ethernet, Fast Ethernet, Ethernet, Fast Ethernet, SONET/SDH, PPP, Fast Ethernet, Ethernet, Gigabit Ethernet
Remote Management Protocol: SNMP, Telnet
Communication Mode: Half-duplex, full-duplex
Features: Modular design, full duplex capability, Modular design, Modular design, firewall protection, layer 3 switching, NAT support, Triple DES, VPN support, VLAN support, manageable, Modular design, firewall protection, auto-sensing per device, VPN support, Flow control, modular design, full duplex capability, layer 2 switching, auto-sensing per device, DHCP support, VPN support, BOOTP support, RARP support, ARP support, VLAN support
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3u, IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3x
Network / Transport Protocol: TCP/IP, IPX/SPX, L2TP, IPSec, TCP/IP, UDP/IP, L2TP, ICMP/IP, SLIP, PPPoE, PPPoA, AAL5, IPoA
Routing Protocol: OSPF, IGRP, RIP, IS-IS, BGP, EIGRP, OSPF, IGRP, RIP, IS-IS, BGP, EIGRP, HSRP
Status Indicators: Power, link OK, Port status, Link activity, power, 100M device connected
Switching Protocol: Ethernet
Line Rate: T-1/E-1
|
Manufacturer's product description
Enterprise and service provider customers continue to drive the need for optimizing operational and management costs, simplifying network management and increasing revenue opportunities. The Cisco 7200 addresses these requirements by collapsing functions previously performed by separate devices into a single, cost-effective platform. Through functional integration, the Cisco 7200 high-performance multifunction platform provides a single, cost-effective platform. The Cisco 7200 series delivers exceptional price/performance to meet the requirements of both enterprise and service providers. With its combination of scalable performance, density, and low per-port pricing, the Cisco 7200 allows network-layer capabilities to be extended to a much wider range of network configurations and environments. Customers can now gain the advantages of high-performance network-layer switching and services, including security, QoS, and traffic management to more locations throughout the network.
|
Expansion / connectivity
Expansion Slots Total (Free):
- 8 ( 6 ) x expansion slot
- 1 memory
- 2 ( 2 ) x PC Card
- 1 memory, 6 ( 6 ) x expansion slot, 2 PC Card
- 6 ( 5 ) x expansion slot
- 1 ( 0 ) x memory
- 1 ( 0 ) x expansion slot, 6 ( 5 ) x expansion slot
- 1 ( 0 ) x processor board
- 2 PC Card
- Memory, 6 ( 4 ) x expansion slot, 8 ( 6 ) x expansion slot
- 4 memory
- 2 ( 2 ) x PC Card
- 1 memory, 6 expansion slot
- 2 ( 2 ) x PC Card, 6 ( 4 ) x expansion slot
- 1 memory
- 2 PC Card, 6 expansion slot, 6 ( 4 ) x PC Card, 8 ( 6 ) x expansion slot
- 1 memory
- 2 ( 2 ) x PC Card
- 1 ( 1 ) x GBIC, 8 ( 5 ) x expansion slot
- 1 memory
- 2 ( 2 ) x PC Card
Interfaces:
- 1 x network - auxiliary - 25 pin D-Sub (DB-25) - 1
- 1 x management - console - 25 pin D-Sub (DB-25) - 1
- 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 - 1
- 1 x network - Ethernet 10Base-T/100Base-TX - 40 pin MII - 1, 2 x network - Ethernet 10Base-T/100Base-TX - RJ-45 - 2
- 1 x management - auxiliary - 1
- 1 x management - console - 1, Network - Ethernet 100Base-TX - RJ-45, 1 x network - auxiliary - RJ-45
- 1 x management - console - RJ-45
- 2 x network - Ethernet 10Base-T/100Base-TX - RJ-45, 3 x network - Ethernet 100Base-TX - RJ-45 - 3
- 1 x management - RS-232 - 9 pin D-Sub (DB-9) - 1, 1 x network - auxiliary - RJ-45 - 1
- 1 x management - console - RJ-45 - 1
- 1 x network - Ethernet 10Base-T - RJ-45 - 1, 1 x network - auxiliary - RJ-45 - 1
- 1 x management - console - RJ-45 - 1
- 2 x network - Ethernet 10Base-T/100Base-TX - RJ-45 - 2
- 2 x network - T1/E1 - RJ-48S - 2 ( WAN )
Miscellaneous
Rack Mounting Kit: Included
Authentication Method: Secure Shell (SSH), RADIUS, PAP, CHAP, TACACS
Pricing Type: Refurbished
Compliant Standards: NEBS level 3, FCC Class A certified, IEC950, UL 1950, VCCI-II, CSA 22.2 No. 950
Power
Power Device: Power supply - hot-plug - plug-in module, Power supply - hot-plug / redundant - plug-in module, Power supply - internal
Installed Qty / Max Supported Qty: 1 (installed) / 2 (max), 2 (max)
Voltage Required: AC 100/240 V ( 50/60 Hz ), AC 110/220 V ± 10% ( 50/60 Hz ), AC 120/230 V ( 50/60 Hz ), AC 100/220 V ± 10% ( 50/60 Hz )
Power Provided: 370 Watt, 280 Watt
Compliant Standards: UL 1950, EN 60950
Power Consumption Operational: 370 Watt
Software / system requirements
Software Included: Drivers & Utilities, Cisco IOS IP, Drivers & Utilities, CiscoWorks, Cisco Secure Policy Manager
OS Required: Cisco IOS, Cisco IOS 12.0(3)T or later, Cisco IOS 12.1(7)E
OS Provided: Cisco IOS
Manufacturer warranty
Service & Support: 3 months warranty
Service & Support Details: Limited warranty - parts and labor - 3 months - carry-in
Environmental parameters
Min Operating Temperature: 32 °F
Max Operating Temperature: 104 °F
Humidity Range Operating: 10 - 90%
Communications
Type: DSU/CSU
Ip telephony
VoIP Protocols: H.323, SIP
Ciao
Listed on Ciao since : 12/24/2007
|
Add to list 
Recommend it 
Receive review alert 
Write a review 
Publish video review 
Featured retailer
