General
MPN: 24301
Device Type: Wireless router
Form Factor: External
Width: 11.6 in
Depth: 6.3 in
Height: 1.8 in
Processor
Type: 1 x Motorola MPC8241
Memory
RAM: 32 MB
Flash Memory: 8 MB
Networking
Connectivity Technology: Wireless, wired
Integrated Switch: 4-port switch
Data Transfer Rate: 54 Mbps
Frequency Band: 2.4 GHz
Data Link Protocol: Ethernet, ATM, Fast Ethernet, IEEE 802.11b, PPP, IEEE 802.11a, IEEE 802.11g
Switching Protocol: Ethernet
Network / Transport Protocol: TCP/IP, L2TP, IPSec, PPPoE
Routing Protocol: RIP-1, RIP-2
Remote Management Protocol: SNMP, HTTP
Status Indicators: Power, active, error
Features: Firewall protection, dynamic IP address assignment , DHCP support, NAT support, VPN support, PAT support, BOOTP support, ARP support, Stateful Packet Inspection (SPI), DoS attack prevention, dynamic DNS server
Compliant Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, X.509, IEEE 802.11i
Ip telephony
VoIP Functionality: VoIP gateway
VoIP Protocols: MGCP, SIP
Antenna
Antenna: External integrated
Antenna Qty: 2
Communications
Type: ISDN / DSL modem combo
Digital Signaling Protocol: EURO-ISDN, ADSL, ADSL2, ADSL2+
Protocols & Specifications: ITU G.992.2 (G.Lite), ITU V.110 (I.463), ITU V.120 (I.465), ITU X.75, HDLC, ITU G.992.1 (G.DMT) Annex A, ITU G.992.1 (G.DMT) Annex B
|
Manufacturer's product description
The Bintec R3000 Series is an ADSL multi-protocol router equipped for versatility and flexibility with an integrated ADSL(2+) modem and automatic ISDN backup. The R3000/R3000w's ADSL modem is compliant with the ANNEX-A and ANNEX-B standards, which means it can be used in many different countries around the world. It has been specially designed to accommodate high-speed Internet access and remote access for use in small to medium-sized companies or remote offices. The device already comes complete with 10 IPSec tunnels including hardware acceleration. Up to 100 additional IPSec tunnels can be added to the system with the purchase of the corresponding license. The second integrated ISDN S0 interface can also be activated optionally with the purchase of a license. As a wireless router, the Bintec R3000w supports the 802.11a/b/g/h standards with a gross transfer rate of 54 Mbps. In addition to WEP encryption, the secure WPA or WPA2 modes for the use of preshared keys or the integration into a Radius server are available to guarantee secure data transmission via the air interface. Access is controlled on the port level via 802.1x. The multi-SSID function makes it possible for build several different user groups, each with their own guidelines. The WDS function (Wireless Distribution System) can be used to create wireless infrastructures for application scenarios in which a wired solution would be too expensive or technically impossible. The devices can be configured using either the HTTP Configurations Wizard (recommended for inexperienced users) or via an HTML user interface. The SSH-encrypted communication to the device provides for secure configuration.
|
Expansion / connectivity
Interfaces:
- 4 x network - Ethernet 10Base-T/100Base-TX - RJ-45
- 2 x modem - ISDN BRI
- 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 ( DMZ )
- 1 x modem - DSL - RJ-11
- 1 x network - Radio-Ethernet
Miscellaneous
Rack Mounting Kit: Optional
Encryption Algorithm: 128-bit WEP, 64-bit WEP, IKE, TKIP, WPA, WPA2, WPA-PSK, PKI
Authentication Method: RADIUS, PAP, CHAP, X.509 certificates, TACACS, TACACS+, MS-CHAP, MS-CHAP v.2
Power
Power Device: Power adapter - external
Ciao
Listed on Ciao since : 10/29/2007
|
Add to list 
Recommend it 
Receive review alert 
Write a review 
Publish video review 
This product has not yet been reviewed. 
